|
Fiber Optic Cable |
Single-mode fiber optic cable |
|
Detection Channels |
Two fiber channels of simultaneous real-time independent intrusion detection per device |
|
Detection Distance |
50 km |
|
Sensing Technology |
Coherent Optical Time Domain Reflectometer (COTDR) |
|
Maximum Fiber Loss |
10dB (typical max distance ~ 50km /ch) |
|
Operating Life |
> 10 years (dependent on operating environment and regular maintenance) |
|
Artificial Intelligence |
Deep-learning-based intrusion detection algorithms optimize sensitivity and probability of detection. Locations can be changed
with parameters to avoid nuisance alarms. Different algorithms exist for buried and fence applications. The system is hybrid
since both are applicable |
|
Detection Resolution |
10 m (32.8 ft) between detection points along sensing fiber (100 measurements per km of sensing fiber) 100 m (328 ft)
minimum cable separation between individually reported disturbances (simultaneous) |
|
System Interface |
Web 2.0 |
|
Cut Resilience and Redundancy |
You can still detect intrusions from the controller within 50m of a fiber optical cable cut. Detection can be within 50m on either
side of a cable cut for a redundant loop configuration |
|
Sensor Sections |
Software configurable, independent sensor sections (detection zones) |
|
Temperature Range |
Sensing Cable: -40~70 °C / D-50 Device: 0~40 °C (AC environment) |
|
Connection Ports |
TCP/IP (Ethernet), relay closures (via FOTAS connected PLC or ADAM module or alternatives) |
|
Inputs and Outputs |
2 x FC/APC single mode optical connectors (back, for sensing cables) 1 x USB2 ports (on back) 1 x Ethernet ports
(10/100/1000 Mbps, on back) |
|
Power Supply |
110 to 240 Vac, 47 to 63 Hz, auto ranging |
|
Power Consumption |
85 W typical, 125 W max |
|
Dimensions / Rack
-Clearance / Weight |
49 cm (19”) x 50 cm x 8.9 cm(2U), 8 kg |
|
Laser Safety Class |
Class 1 (IEC 60825-1, 21CFR1040.10), shutoff: key switch on front panel |
|
MTBF |
> 80,000 hours |
|
Warranty |
2 years, with optional per year warranty extension available. |
|
Regulatory Certification |
ISO9001 accredited design and manufacturing is CE certified (Electromagnetic compatibility Directive (EMC) 2014/30/EU
(EN 55032:2015 Class A, EN IEC 61000-3-2:2019+A1:2019, EN 61000-3-3:2013+A1:2019, EN 55035:2017+A1:2020,
EN 61000-4-2:2009, EN 61000-4-3:2020, EN 61000-4-4:2012, EN 61000-4-5:2014+A1:2017, EN 61000-4-6:2014, EN 61000-4-8:2010,
EN 61000-4-11:2020), The low voltage directive (LVD) (2014/35/EU), (IEC 62368-1:2018, EN IEC 62368-1:2020 + A11:2020) |
